Perle S-10G Media Converters Front View

More Views

Perle S-10G 10 Gigabit Ethernet Media Converters

SKU:S-10G

Be the first to review this product

Usually ships in 1-3 days.

£0.00
Product Name Price Qty
Product Name Price Qty
S-10G-XTXH - 10 Gigabit Media Converter | 05060541
SKU: 05060541
Excl. VAT: £1,978.00 Incl. VAT: £2,373.60
See Euro Price
S-10G-XTS - 10 Gigabit Media Converter | 05060511
SKU: 05060511
Excl. VAT: £1,315.00 Incl. VAT: £1,578.00
See Euro Price
S-10GT-XFPH - 10 Gigabit Ethernet Stand-Alone Media Converter | 05060561
SKU: 05060561
Excl. VAT: £728.00 Incl. VAT: £873.60
See Euro Price
S-10G-XTSH - 10 Gigabit Media Converter | 05060521
SKU: 05060521
Excl. VAT: £2,226.00 Incl. VAT: £2,671.20
See Euro Price
S-10G-XTX - 10 Gigabit Media Converter | 05060531
SKU: 05060531
Excl. VAT: £1,006.00 Incl. VAT: £1,207.20
See Euro Price
S-10G-STS - 10 Gigabit Media Converter | 05060501
SKU: 05060501
Excl. VAT: £974.00 Incl. VAT: £1,168.80
See Euro Price

Quick Overview:

Perle S-10G Media Converters transparently connect 10 Gigabit Ethernet links over multimode or single mode fibre. Each 10GbE Media Converter comes with two pluggable transceiver ports that support fibre to fibre, copper to fibre or copper to copper media conversion.

Its features include:

* Fibre to Fibre, copper to fiber and copper to copper conversion
* Uses a variety of 10G transceivers supplied by Perle, Cisco or other MSA compliant SFP+ and XFPs
* Advanced features –Smart Link Pass-Through, Fibre Fault Alert, Built-in Link Test Generator and Loopback
* Support for Power Level 1,2,3 as well as high-power Level 4 XFPs
* Optical signal regeneration: 3R (re-amplify, reshape, and retime)

Read More

Frequently Bought With

Product Description

Fibre to Fibre and Copper to Fibre conversion is achieved by inserting XFP or SFP+ fibre transceivers that support multimode and single-mode fibre, including CWDM/DWDM wavelengths. Copper to copper is achieved by inserting SFP+ Direct Attach Cable (DAC), also known as twinax, or XFP 10Gbase-CX4 transceivers.

The empty transceiver ports on the S-10G Media Converters allow for flexible network configurations to meet any requirement using a variety of 10G transceivers supplied by Perle, Cisco or other manufacturers of MSA compliant SFP+ and XFPs. You can use these products to convert:

SFP+ to SFP+
XFP to XFP
XFP to SFP+
SFP to SFP ( 1000Base-x to 1000Base-x )
SFP+ to CX4

Perle 10 Gigabit Ethernet to Fibre Converters provide an economical path to extend the distance of an existing 10GbE link. Network Administrators can “see-everything” with Perle’s advanced features such as Smart Link Pass-Through, Fibre Fault Alert, a built-in Link Test capability and Loopback. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make Perle S-10G Media Converters the smart choice for IT professionals. 10G Media Converters are also available for managed networks with AAA security.

Smart Link Pass-Through
When the Smart Link Pass-Through switch is enabled (default), each port will reflect the state of its port peer. In this mode, if a link loss is detected on one port, the transmit signal on the other port is disabled “passing through” the state of the failed link. This enables managed switches and other devices to report link failures to their network NMS. When the switch is in the down position, Smart Link Pass-Through is disabled. If a link loss is detected on one port, the transmit signal remains enabled on the other port.

Fibre Fault Alert
With Fibre Fault Alert the state of the 10 Gigabit Ethernet receiver is passed to the transmitter. This provides fault notification to the partner device attached to the 10G Ethernet interface of the media converter.

3R – Optical Signal Regeneration
Optical signal regeneration: 3R (Re-amplify, Reshape, and Retime the signal) ensures that there is a quality link at 10 Gigabit speeds.

Built-in Link Test
When enabled, the built-in packet generator transmits Ethernet test frames to its 10 Gigabit Ethernet peer. The remote media converter will auto-detect the test frames and loopback the test frames. Any frames received in error, will cause the Power, LK1 and LK2 LEDs to illuminate in a specific combination to identify the error. During the test different bit test patterns will be utilised every 5 seconds ensuring a thorough link test.

Test Mode Auto-detect
No switches are required to be flipped in order to go into test mode. The remote media converter will enter test mode automatically when requested by its central site peer. This virtually eliminates unnecessary truck rolls to a remote site when diagnosing a link failure.

EDC Mode Control
Electronic Dispersion Compensation (EDC) is an algorithmic method used to compensate for optical dispersion that occurs on high speed 10 Gigabit links. EDC mode settings are automatically configured by the media converter based on the information retrieved from the SFP+ or XFP module. This will enable proper operation for extended multimode 10GBase-LRM as well as active or passive copper cabling.

Module Temperature Protection
Protects your DOM/DMI capable SFP+ or XFP module by monitoring its internal temperature and will automatically shut down the XFP or SFP if the module is operating above its maximum temperature threshold.

High Power Level 4 XFPs
High powered Level 4 XFPs are supported in XTSH and XTXH models.

Gigabit SFP Support
The 10 Gigabit media converter model with dual SFP+ slots can also support Gigabit (1000Base-X) SFPs. This allows users to use Gigabit SFPs today and migrate to 10G SFP+ in the future. Both slots must be populated with Gigabit SFPs.

Jumbo Packets
Transparent to jumbo packets.

VLAN
Transparent to VLAN tagged packets.

Power Strain Relief Strap
A strain relief strap is provided to ensure a solid and secure power connection to the media converter. Ideal for areas that may be exposed to any vibration.

Remote Loopback
Capable of performing a loopback on each 10 Gigabit interface. In this mode, all frames received on the port in loopback mode will be transmitted back. This provides users with the capability of utilising their own in-house test generators for testing the link.

Technical Specification

By Manufacturer Perle
Dimensions (mm) 8 x 12 x 4.2 cm
Operating temperature (°C) 0°C to 50°C
Power Requirement 12v DC
Approvals & Certifications CISPR 22, ECCN: 5A991A, EN61000-3-2, FCC, REACH, RoHS, UL 60950-1, WEEE

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register