48v power supply for use with Ubiquiti Outdoor Instant 802.3af 48v to 16v where a powered switch with 48v is not available.
Using 48v supplies allows long ethernet cable runs, typically up to 100 metres.
This unit must NOT be connected directly to Ubiquiti devices which are limited to a 24v input maximum. Connecting Ubiquiti devices directly to this unit without the Ubiquiti Outdoor Instant 802.3af 48v to 16v will damage the device.
| Signal Chains | 2x2 |
|---|---|
| Chain Type | MIMO |
| Antenna Type | Omni |
| Gain | 10 dBi |
| Polarisation | Dual Linear |
| Polarisation Directions | Vertical |
| Polarisation Directions | Horizontal |
| Beamwidth Horizontal | 360 ° |
| Beamwidth Vertical | 12 ° |
| VSWR | 1.7:1 |
| Cross Polarisation | >25 dB |
| Impedance | 50 Ω |
| Electrical Down Tilt | 4 ° |
| Connector | SMA RP Jack |
| Connector 2 | SMA RP Jack |
| Frequency Min | 2350 MHz |
| Frequency Max | 2550 MHz |
| Dimensions | 1030 mm |
| Dimensions | 122 mm |
| Dimensions | 84 mm |
| Weight | 2100 g |
| Mounting | Pole |
| Wind Survial | 201 Km‾h |
| Wind Loading | 62N @ 201km/h N @ Km‾h |
| ETSI | EN 302 326 DN2 |
| Certifications | CE |
| RoHS | Yes |
| Ref # | 803 |
| Ref | 2G10 |
| Description | Ubiquiti AirMax Omni 2G10 2.4 GHz 10 dBi |
| Manufacturer | Ubiquiti |
| Manufacturer URL | Link |